Cylindric sample (C007_L02_S01)
from FAST Lab (A.R.)
Virgin PLA - Sample #004
Main info
Product sample #004
| Cluster | 007 - Virgin PLA on accessible low-cost 3D printing systems. |
| Waste/Scrap type | // |
| Waste/Scrap producer | // |
| Recycling steps | // (Virgin material). |
| Granulate nominal size | ~ 3 mm (average size). |
| Material type | PLA pellet - 3D printing Grade. |
| Material specs | Virgin PLA. |
| Material producer | Natureworks. |
| Processing | 3D Printing - Fused Particle Granulation (FPG). |
| 3D Printing system | HangPrinter V 3 (Modified). |
| Equipment producer | Fast Lab, original HangPrinter concept by Torbjørn Ludvigsen. |
| Nozzle diameter | 3 mm. |
| Layer height | 0.8 mm. |
| Printing mode | 1 perimeter. |
| Printing speed | 16 mm/s. |
| Printing hot-end temperature | 195 °C. |
| Post-processing | No post-processing. |
| Finishing | Layer-by-layer appearance from 3D printing process. |
| 3D model features | Simple overhang from the joint shape. |
| 3D model type | Component of a potential application (furniture). |
| Recyclate library reference | C005_M01 |
Resources and links
| HangPrinter webpage | Here. |
| HangPrinter redesign | Here. |
| Research article | Here. |
Applications
Furniture - Customizable joints
Customizable joints for personalizable and reparable coat hangers and structures.
This 3D model is a component (joint detail) of a customizable and reparable coat hanger and structure. The original concept has been developed during the Ph.D. research period abroad of Alessia Romani at FAST Lab (Western University).
